Franke FDW 908 IB XS Instruction Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
EN
1
16
USE
Control panel
Button Function LED button
A The button only works when the door is open.
Press Briefly = Turns the Lights On/Off at maximum
intensity.
Press and hold for 2 Seconds = Turns the Courtesy Lights
On/Off.
B Door Open or Closed
Press briefly = Performs a Reset of the Filter saturation
alarm.
After 100 hours in operation the Drop symbol is
displayed to indicate saturation of the Metal
Grease Filters.
After 200 hours in operation the letter
C is displayed to
indicate saturation of the Activated Charcoal filters.
Door Open or Closed
Press and hold for 2 Seconds = Enables/Disables the
Activated Charcoal Filter Alarm with the Motor turned
off and no Filter Alarm triggered.
Symbol C flashes twice = A.C. Filter Alarm Activated
Symbol C flashes once = A.C. Filter Alarm Deactivated
C Door Open.
Press briefly = Activates/Deactivates Delay mode, causing
automatic shutdown of the Motor and the Lighting system
from any speed with a 30’ delay. It is disabled by pressing
the same button again, turning the motor off or closing the
door.
Displays the Clock symbol.
Works both with Door Closed and Open with Motor +
Lights = Off.
Press and hold for 4 Seconds = Enables/disables the
Keyboard lock.
All the LED buttons flash twice. During the Lock the
LEDs light up in sequence.
D Only works with the Door Open.
Press briefly = Enables/Disables Intensive speed. This speed
is timed to run for 10 minutes. At the end of this time the
system will return to the speed set previously.
It is disabled by pressing the same button again, turning the
motor off or closing the door.
Displays the symbol I.
E Only works with the Door Open = increases the operating
speed.
The number of lighted segments increases.
F Only works with the Door Open = decreases the operating
speed.
The number of lighted segments decreases.
G Only works with the Door Open.
Press briefly = Turns the Motor off
LEDs go out
Door Open or Closed
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the Remote control.
LED buttons flash twice = Remote control Enabled
LED buttons flash once = Remote control Disabled
H Door Open = Closes the Door + Lights and Motor Off
Door Closed = Opens the Door + Lights and Motor On.
Warning: If the Door remains partially open for any reason,
press the Button to complete the opening or closing cycle.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments